Direct “Drop-In” LED T8 Compatible Ballasts List
Location： ->
Direct “Drop-In” LED T8 Compatible Ballasts List
Time: 14:47:29 From:Konkalighting
Warning: Direct “Drop-in” LED T8 tubes will only operate properly on compatible instant-start ballasts. Please refer to direct “Drop-in” LED T8 compatible ballast list. Compatibility subject to change as additional ballasts are tested. If you do not see your ballast on the list, please contact us.
Warning: Direct replacement for the following lamps only: 25W/48T8/HF, 28W/48T8/HF, 30W/48T8/HF, 32W/48T8/HF, F32T8 32W, F32T8 30W, F32T8 28W, F32T8 25W
ballast models
Manufacturer
PHILIPS-ICN-2P32-N
PHILIPS-ICN-1P32-N
PHILIPS-ICN-4P32-N
PHILIPS-ICN-3P32-SC
PHILIPS-ICN-4P32-N
PHILIPS-ICN-3P32-N
PHILIPS-ICN-2P32-N
PHILIPS-ICN-1P32-N
PHILIPS-IOP-2P59-SC
PHILIPS-IOP-1P59-SC
PHILIPS-IOP-3P59-SC
PHILIPS-IOP-4P59-SC
GOPA-4P32-SC ( 347)
GOPA-3P32-SC ( 347)
GOPA-2P32-SC ( 347)
GOPA-1P32-SC ( 347)
IOPA-2P32-N
IOPA-3P32-N
IOPA-4P32-N
IOPA-1P32-N
IOPA-2P32-LW-N
IOPA-4P32-LW-N
IOPA-1P32-LW-N
IOPA-3P32-LW-N
IOPA-3P32-LW-SC
IOPA-4P32-LW-SC
IOPA-2P32-LW-SC
IOPA-1P32-LW-SC
IOPA-2P32-HL-N
IOPA-3P32-HL-N
IOPA-4P32-HL-N
IOPA-1P32-HL-N
GOPA-2P32-LW-SC
GOPA-3P32-LW-SC
GOPA-4P32-LW-SC
GOPA-1P32-LW-SC
REB-2P32-SC
REB-4P32-SC
REB-3P32-SC
REB-1P32-SC
GE432MV-N-42T
GE332MV-N-42T
GE232MV-N-42T
GE132MV-N-42T
GE232MAX-N/ULTRA
GE332MAX-N/ULTRA
GE432MAX-N/ULTRA
GE132MAX-N/ULTRA
GE432max347-H
GE332max347-H
GE232max347-H
GE132max347-H
GE432PS347-N
GE332PS347-N
GE232PS347-N
GE132PS347-N
GE-232-MV-N-DIY
GE-332-MV-N-DIY
GE-432-MV-N-DIY
GE-132-MV-N-DIY
GE232MAX-H/ULTRA
GE332MAX-H/ULTRA
GE432MAX-H/ULTRA
GE132MAX-H/ULTRA
GE232MAX347-N
GE332MAX347-N
GE432MAX347-N
GE132MAX347-N
GE232-120RES-DIY
GE332-120RES-DIY
GE432-120RES-DIY
GE132-120RES-DIY
QTP 4*32T8/UNV ISN-SC
QTP3x32T8/UNV ISN-SC
QTP2x32T8/UNV ISN-SC
QTP1x32T8/UNV ISN-SC
QHE 2X32T8/UNV ISH HT SC
QHE 3X32T8/UNV ISH HT SC
QHE 4X32T8/UNV ISH HT SC
QHE 1X32T8/UNV ISH HT SC
QT4x32 T8/347 ISN-SC
QT3x32 T8/347 ISN-SC
QT2x32 T8/347 ISN-SC
QT1x32 T8/347 ISN-SC
QHE 2X32T8/UNV ISN-SC-1
QHE 3X32T8/UNV ISN-SC-1
QHE 4X32T8/UNV ISN-SC-1
QHE 1X32T8/UNV ISN-SC-1
QHE 2X32T8/UNV ISL-SC-1
QHE 3X32T8/UNV ISL-SC-1
QHE 4X32T8/UNV ISL-SC-1
QHE 1X32T8/UNV ISL-SC-1
ISL432T8120
ISL332T8120
ISL232T8120
ISL132T8120
Triad-B2861277RH
QHE 1x32t8/UNV ISH-SC
QHE 2x32t8/UNV ISH-SC
QHE 3x32t8/UNV ISH-SC
QHE 4x32t8/UNV ISH-SC
QHE 4X32T8/347 ISN-SC
QHE 3X32T8/347 ISN-SC
QHE 2X32T8/347 ISN-SC
QHE 1X32T8/347 ISN-SC
B232IUNVHP-N
UNIVERSAL LIGHTING
b432IUNVHP-A
UNIVERSAL LIGHTING
b132IUNVHP-A
UNIVERSAL LIGHTING
b332IUNVHP-A
UNIVERSAL LIGHTING
B232I120L-A
UNIVERSAL LIGHTING
B432I120L-A
UNIVERSAL LIGHTING
B332I120L-A
UNIVERSAL LIGHTING
B132I120L-A
UNIVERSAL LIGHTING
UNIVERSAL LIGHTING
UNIVERSAL LIGHTING
UNIVERSAL LIGHTING
UNIVERSAL LIGHTING
B232IUNVHE-A
UNIVERSAL LIGHTING
B332IUNVHE-A
UNIVERSAL LIGHTING
B432IUNVHE-A
UNIVERSAL LIGHTING
B132IUNVHE-A
UNIVERSAL LIGHTING
B232IUNVEL-A
UNIVERSAL LIGHTING
B332IUNVEL-A
UNIVERSAL LIGHTING
B432IUNVEL-A
UNIVERSAL LIGHTING
B132IUNVEL-A
UNIVERSAL LIGHTING
E232T8IS347/N/BULK
Related News
12-16-2015
11-27-2015Depending Upon Ceiling Height You NOW Have Other Choices!
LED Tubes Or 165 Lumen Per Watt Super Strip
12' and below are OK for retrofit led tubes but over 12' and our new LED Super Strip might be the best choice.
Replace Your Existing Fluorescent Bulbs With An LED Tube
And Eliminate Your Lighting Maintenance, Reduce your Energy
Cost and enhance the quality of light....but BEWARE!
The Facts Are Not All LED Tubes Are Built The Same???
Beware Of The Internet And Low LED Tube Prices!
At Neu-Tech Energy Solutions we provide solutions to your lighting needs. What you see on the internet might look good but the facts are you better know what you are doing when ordering a LED Tube to replace your existing T12, T8 or T5 Fluorescent bulbs.
You need to be aware that there are several different kinds of ballast out there, so not all ballast compatible tubes will work with existing ballast.
Tombstones (Bulb holders) are either shunted and non-shunted, this is a critical issue in selecting the correct led tube to work with your tombstone.
Neu-Tech offers both AC & DC power led tubes, both installation and safety concerns must be surfaced and understood before you make the decision what type of led bulb is best for your facility. Neu-Tech also handles a full line of kelvin and wattage specify led tubes. From 15, 18, 20 & 22watt, the correct led tube selection is critical in achieving the greatest energy saving and optimizing the current fixtures light output.
Viewing or beam angle is also another critical part of selecting a led tube to maximize the light output of the current fixture. Neu-Tech will assist our customers in the correct led tube selection for your facility.
There is a difference!
When you deal with Neu-Tech Energy Solutions we will provide you a complete custom lighting package for your application.
In some cases you may want a 15W Warm White in a particular place and a 22W Day White in another where people are reading fine print and you need more light. You may have a high ceiling above 15' that might lead us to tell you that you need one of our LED Super Strips instead of a standard LED tube.
Call any one of our LED Retrofit Lighting Specialist To Get The Right LED Tube Specified for you lighting project. One Size Fits All Does NOT work with LED Tube Lighting
262-707-7288 / 513-702-3533 / 513-325-1623 / 407-230-9096
See our side menu for More Information on Tube Lighting
Are Your LED Tubes Over 10" High Then You May Need One Of Our
LED Super Strips?
If You Are Tired Of Changing Out Ballast And Fluorescent Tubes?
Eliminate Your Old Fluorescent Lights With Our New LED Super Strips
This is a typical application of a large 100,000 Square Foot warehouse that was using (96”)Double T12 High Output Lamps. They spent about $3000 a year in maintenance on these T12 Light Fixtures. Our LED Super Strips will eliminate their lighting maintenance for the next 10 Plus years and they will reduce their energy consumption by 57% and increase their light output by up to 30%. We can replace any T5, T8, T12 or LED Tube Light and save you money.
Use Your Existing Fixture
Pull Out Existing Tubes
Insert New LED Super Strips
Truck Repair Facility
Large Food Distributor
Automobile Service Department
Manufacturing Plant
Linear LED Super Strips have no mercury.
No flickering or buzzing equals no migraines or headaches
No glass to shatter
Operating cost
50 - 70% reduction in wattage with LED linear strips over T-8, T-12 and T-5 florescent bulbs
No disposal cost for a linear LED Super Strip
Eliminate Maintenance Cost for 10 Plus Years
Operating performance
Up to 30% more light output with LED linear strips
117,000 hour life Linear LED strips are up to 75% more efficient. Fluorescent bulbs last an average of 16,000 hrs.
LED linear strips still give off Light at End-Of-Life, 70% - Florescent bulbs are dead at end of life.
In order to keep up with LED linear strips, you will have to replace the T8 bulbs 6 times.
No Need To Keep Replacing Your T5, T8 or T12 Fluorescent Tubes Every Few Years
When You Can Retrofit Them With Our
LED SUPER STRIP Lights
That Last over 100,000 Hours and Give you 30% More Light
Three (3) Easy To Install Kits
For Fixtures Up To 16’ high using 2-6 T8 Fluorescent Tubes 4’ Long. Example: Existing T8 Six Bulb Fixture will use (2) of our 40 Watt Super LED Strips.
86 Total Watts versus existing 225 Watts…Over 60% Energy Savings and up to 30% brighter and will last 117,000 hours.
For Fixtures Up To 24’ high using T12 or T8 Fluorescent Tubes 8’ Long. Example: A double 8’, T12 Fluorescent Fixture will use (3) of our 32 Watt Super LED Strips with a total of 104 Watts versus the existing Double T12 at 242 Watts. A 57% savings and up to 30% brighter and will last 117,000 hours
For Fixtures Up To 30’ high using 6 Bulb T8 or 5 bulb T5 HO fixtures. Example: Existing 6 Bulb T8 or 5 Bulb HO T5 will be using 225-235 Watts. We will use (4) of our 32 Watt Super LED Strips using only 132 Watts. A 44% savings in energy and up to 30% brighter and will last 117,000 hours.
Call Our LED Super Strip Lighting Specialist
Dave 262-707-7288
or email your requirements to This email address is being protected from spambots. You need JavaScript enabled to view it.BALLAST,最全面的BALLAST文章 - 电子工程世界网
在电子工程世界为您找到如下关于“BALLAST”的新闻
BALLAST资料下载
The IR2520D(S) is a complete adaptive ballast controller and 600V half-bridge driver integrated into a singleIC for fluorescent lighting applications. The IC includes adaptive zero-voltage switching...
The KA7543 is an advanced lamp current feedback dimmingcontrol IC. This ballast control IC provides all of thenecessary features to implement wide range dimmingcontrol, soft start and constant power...
电子镇流器设计-electronic lamp ballast designWith a continuous growth rate of 20% per year, electroniclamp ballasts are widely spread over the world. Even thoughthe light out of a fluorescent tube has a...
Efficient Safety Circuit for Electronic Ballast...
250 W HID metal halide electronic ballast...
Intelligent multipower digital ballast for fluorescent lamps...
De&#115 cription: The IR2159/IR21591 are complete dimming ballast controllers and 600Vhalf-bridge drivers all in one IC. The architecture includes phase control for transformer-less lamp power...
T8 36W*2 Lamp Ballast Design With ICB1FL02G...
Electronic ballast with PFC using L6574 and L6561...
The IRPLCFL5E reference design is an electronic ballast for driving 26W compact fluorescent lamps from 220VAC....
BALLAST相关帖子
好喔)。对于home automation 的public profile已经规定了调光器应该有哪些cluster，如：Color Control Cluster，Ballast Configuration Cluster 等。然后，profile也规范了color control cluster 的ID，这个就是clusterID了，
如果学过面向对象编程的思想，那就更好理解了：
，限制VDS的上升速率，从而实现了零电压关断。但是在ballast中，同样的半桥谐振式的工作方式，这个电容往往就只有一个。第一次见到的时候，就会奇怪了，怎么是这样呢？上下两个MOS，只有一个MOS上并了电容，什么意思呢？后来想明白了，半桥上下两个MOS的DS上的电容在电路上的表现是并联关系，虽然ballast中只用了一个，但是对上下两个MOS的缓冲作用是一样的。但是只用一个电容，成本就下降了许多...
DS上各并联一个高频特性好的吸收电容，用来提供MOS关断瞬间的电流通道，限制VDS的上升速率，从而实现了零电压关断。但是在ballast中，同样的半桥谐振式的工作方式，这个电容往往就只有一个。第一次见到的时候，就会奇怪了，怎么是这样呢？上下两个MOS，只有一个MOS上并了电容，什么意思呢？后来想明白了，半桥上下两个MOS的DS上的电容在电路上的表现是并联关系，虽然ballast中只用了一个，但是对...
功率节能灯，高性能电子镇流器；可调光电子镇流器方案：ICB1FL02G:Smart Ballast Control IC for Fluorescent Lamp Ballasts
集成PFC高性能电子镇流器驱动芯片ICB2FL01G:Smart Ballast Control IC for Fluorescent Lamp Ballasts
集成PFC高性能电子镇流器驱动芯片...
UBA2070T(P) : 600 V CCFL ballast driver IC for CCFL backlighting LCD 背光驱动UBA2071T（TS） : Full bridge control IC for. CCFL backlighting LCD 背光驱动 UBA2072T（TS） : Full bridge control IC for. CCFL backlighting...
fluorescent lamp), which typically consumes around four to five times less power for a given brightness level. But CFLs are relatively expensive, require an electronic ballast to operate, are difficult to dim...
提供HID头灯. 目前国内的HID BALLAST的市场不好有两方面原因,一个是灯的质量不稳定,目前国内能量产的几家灯厂都可以说是手工作的,离散性很大,采用的原材料不过关,工艺落后所至,在加上作灯的厂不懂电子,灯的两根进线的耐压应该作的足够的高,可现在没有一家能做大到,我曾测过那两根线的耐压,单根耐压不足2万伏,做在改装车上只要其中一根高压线和车体挨在一起,开灯的时候BALLAST绝对的会坏掉...
EMC filtering will be required
& & & & Good experience of electronic ballast, UPS, switching power supply, DC-DC converter etc.
& & & & Experience providing...
Electronics/Electrical Engineering with 3 years plus experience in ballast design
Good understanding on power electronics circuit
Good verbal and written English.
Frequent user of...
BALLAST视频
你可能感兴趣的标签
热门资源推荐